News
Taizhou Taibo Plastic Co., Ltd

News

Industry News

Company News

Precautions for the installation of plastic water tanks

1、 Installation environment: When installing a plastic water tank, it should be in a horizontal position and able to withstand the weight when the tank is filled with water; Due to the protrusion of the bottom of the water tank towards the box during production, an appropriate amount of fine sand can be used to fill the bottom during installation, increasing the load-bearing capacity of the bottom of the water tank; The temperature around the water tank cannot exceed the limit range of cold and heat resistance of the water tank.

28

2024

/

05

The reasons for fading of blow molded products

Also known as hollow blow molded products, a rapidly developing plastic processing method. The tubular plastic preform obtained by extrusion or injection molding of thermoplastic resin is placed in a split mold while it is hot (or heated to a softened state). After the mold is closed, compressed air is immediately introduced into the preform to blow and expand the plastic preform tightly against the inner wall of the mold. After cooling and demolding, various hollow products are obtained. The manufacturing process of blow molded film is very similar to that of hollow products in principle, but it does not use molds. From the perspective of plastic processing technology classification, the forming process of blow molded film is usually included in extrusion. We often find that blow molded products may fade more or less after long-term storage, so why do blow molded products fade? Let's explain to everyone the reasons for the fading of blow molded products.

28

2024

/

05

The Processing and Forming Method of Plastic Rolling

1、 What is roll forming? Rotational molding, also known as rotational molding, rotary molding, rotary molding, etc., is a technical method for hollow forming of thermoplastic materials. Can be made into various shapes, sizes, and colors (both inside and outside) of plastic products. The product features integrated molding and can be manufactured with triple layers of foam as needed to enhance the strength of the barrel. The product is lightweight, tough, has strong impact resistance, and excellent drug resistance, making it a rare plastic processing and molding method.

28

2024

/

05

What is blow molding and vacuum molding

1、 Blow molding: Blow molding is a method of processing plastic products by using compressed air to cause hollow plastic billets in a high elastic or plastic state to undergo expansion deformation, and then cooling and shaping them. According to the type of blow molded products, this processing method can be divided into hollow blow molding and thin film blow molding.

28

2024

/

05

< 12 >